The KESSEL Ferrofix trough drain 6220100 is a professional stainless steel drain channel for draining floor water in, among other places, restaurant kitchens and other professional commercial spaces.
The box drain has dimensions of 105 x 20 x 6 cm , a DN 125 drain connection , and an integrated glue flange for connecting floor seals.
Thanks to the robust stainless steel construction, ground grate slats, and adjustable legs, this channel drain offers a practical solution for professional floor drainage.
Robust stainless steel construction
The Ferrofix box gutter is manufactured from stainless steel with a material thickness of 1.5 mm .
The stainless steel has been pickled in a dip bath. This treatment ensures a clean and corrosion-resistant finish.
The attachment is made of stainless steel 1.4301 .
This makes the box gutter suitable for applications where a sturdy and low-maintenance drainage structure is important.
Integrated adhesive flange
The box gutter features a glue flange with a height of 6 mm .
This flange is fitted all around and has an outward-facing edge of 5 cm .
The welded miters ensure a continuous connection around the gutter profile.
The adhesive flange is intended for connecting suitable floor seals and helps prevent moisture penetration into the floor structure when installed correctly.
Suitable for thin floor finishes
The gutter profile is suitable for thin floor coverings, such as floors with an epoxy resin finish.
This makes the Ferrofix suitable for professional spaces where a seamless or thin floor finish is applied.
The exact connection must be coordinated with the flooring system used.
Built-in longitudinal and transverse slope
The Ferrofix box gutter features longitudinal and transverse slope .
As a result, water is guided within the gutter to the drain point.
This construction supports efficient drainage of floor water and limits the risk of water standing in the gutter.
Stainless steel grate with anti-slip finish
The gutter is fitted with a grate with polished grate slats.
The grating has anti-slip class R12 according to DIN 51130 and class C according to DIN 51097 .
These classifications describe the slip resistance under various test conditions.
The grate is inlaid and can be removed for cleaning and maintenance.
Load class L 15 according to EN 1253-1
The Ferrofix box gutter has load class L 15 according to EN 1253-1 .
This classification relates to the mechanical load to which the drain and the cover may be subjected.
When selecting a drain, the load at the installation site must always be taken into account, for example from pedestrians, transport vehicles, or equipment.
The load class must correspond to the actual use of the space.
Important information about load classes and standards
Drains, covers, and fittings must be selected and installed in such a way that they can withstand the loads that may occur at the installation site.
The following European standards are relevant in this regard:
-
EN 1253-1, EN 1253-6, EN 1253-7 and EN 1253-8: standards for drains and related applications in buildings.
-
EN 124: standards for covers, gullies and manhole covers in areas accessible to pedestrians and vehicles.
If there is any doubt regarding the required load class, a higher, suitable class must be selected.
Please note: the reference to EN 124 is a general installation guideline. The specified load class of this particular Ferrofix box channel is L 15 according to EN 1253-1 . This does not automatically mean that the box channel is suitable for all vehicle loads.
Adjustable legs for height leveling
The box gutter is equipped with legs for height leveling.
This allows the gutter to be accurately positioned at the desired height during installation.
This simplifies aligning the gutter with the floor structure and the final floor finish.
DN 125 drain connection
The Ferrofix features a DN 125 connection with an external connection diameter of 12.5 cm .
The drain connection must be connected to a suitable drainage system.
During installation, the pipe diameter, the required discharge capacity, and the applicable installation regulations must be checked.
Professional floor drainage
With a length of 105 cm and a width of 20 cm, the Ferrofix offers an elongated drain opening for collecting floor water.
The combination of the stainless steel grate, the integrated adhesive flange, and the built-in slope makes the gutter suitable for professionally designed drainage systems.
Maintenance and cleaning
The stainless steel surfaces can be cleaned with suitable cleaning agents for stainless steel.
The inlaid grate makes the inside of the gutter accessible for maintenance.
Regular cleaning helps limit the accumulation of dirt and deposits.
Suitable for professional applications
The KESSEL Ferrofix box drain can be used in professional spaces where floor water needs to be drained in a controlled manner.
Consider restaurant kitchens, commercial kitchens, and other wet commercial spaces, provided that the floor construction, the required drainage capacity, and the load class are suitable.
The KESSEL Ferrofix 6220100 combines a sturdy stainless steel construction with an integrated adhesive flange, a DN 125 connection, and an anti-slip grate.
Specifications
Article code: 6220100
EAN / GTIN: 4026092098738
Brand: KESSEL
Series: Ferrofix
Product type: Stainless steel box drain / floor drain
Material: Stainless steel
Attachment material: Stainless steel 1.4301
Material thickness: 1.5 mm
Surface treatment: Dip-etched
Length: 105 cm
Width: 20 cm
Height: 6 cm
Dimensions (LxWxH): 105 x 20 x 6 cm
Nominal connection: DN 125
External connection diameter: 12.5 cm
Seal: Adhesive flange
Adhesive flange height: 6 mm
Width of outward-facing glue edge: 5 cm
Welded miters: Yes
Type of cover: Grille
Grate material: Stainless steel
Grille color: Silver
Grille lock: Inserted
Anti-slip class: R12 according to DIN 51130
Anti-slip class wet barefoot zones: C according to DIN 51097
Tax class: L 15
Standard load class: EN 1253-1
Other relevant standards for selection: EN 1253-6, EN 1253-7, EN 1253-8 and EN 124, depending on the application.
Longitudinal drop: Yes
Crossfall: Yes
Legs for height leveling: Yes
Suitable for thin floor coverings: Yes
Suitable for epoxy resin floors: Yes, with a suitable floor structure
Net weight: 11 kg
Gross weight: 11 kg
Application: Professional floor drainage
Use: Restaurant kitchens, commercial kitchens, and other suitable commercial spaces
Order unit: 1 piece
